Description
The Punch PM600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum.
High level input capable with Auto Turn-On circuit
RCA pass-thru outputs
Features C.L.E.A.N. Set-up
Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
12dB/octave Butterworth crossover
On-board Punch EQ with +18dB boost @ 45Hz
Muted turn on
Stealth top mounted control panel
Cast aluminum heatsink
Short circuit protection
Over current protection
Marine grade two part epoxy coating on circuit boards
Marine grade stainless steel hardware
2 Year Warranty
Input Sensitivity
150 mV - 12 V
Recommended Fuse
(not included)
100 A
Average Current Draw (13.8V Music)
45 A
Efficiency (average)
68% @ 4-Ohm
Dynamic Power
(PVC/PowerCube®)
129 Watts x 4 @ 4-Ohms 0° Res
211 Watts x 4 @ 2-Ohms 0° Res
Shipping Weight
12.8 Lbs. (5.80 Kg.)
CEA-2006 Compliant
CEA-2006 Power Rating
75W x 4 @ 4Ω
≤1.0% THD+N
Suggested Alternator
75 A
Operating Voltage
9 - 16 VDC
Max. Current Draw (13.8V Sinewave)
90 A
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
Crossover Controls
Front/Rear High-Pass (HP):50Hz-250Hz @ 12dB/octave Butterworth
Front/Rear Low-Pass (HP):50Hz-250Hz 12dB/octave Butterworth
All-Pass: Yes
Number of Channels
4
Rated Power
(RMS Continuous Power)
75 Watts x 4 @ 4-Ohm
150 Watts x 4 @ 2-Ohm
300 Watts x 2 @ 4-Ohm Bridged
Total Power
(Sum of Rated Power)
600 Watts
Bridgeable
Yes
Tone Controls
Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Front Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Rear Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
Function depends upon LP/AP/HP switch position
Signal Input
Hi/Low level: 2 RCA pair
Signal Output
Low level: 1 RCA pair
Power Input Connector
Captive C-Clamp
Power Wire Gauge
4 AWG
Speaker Output Connector
Captive C-Clamp
Speaker Wire Gauge
8 AWG to 18 AWG
Heat Sink Type
Cast aluminum
Cooling
Convection
Remote Controls
Optional Punch Level Control (PLC2) Ready
Visual Indicators
Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
Circuit Topology Class
Class A/B
Frequency Response
20Hz to 20kHz +/- 1.0dB
Dimensions (H x W x D)
2.38 x 7.76 x 13.28 (in)
6.05 x 19.71 x 33.73 (cm)
Dimensional Diagram
Extra Information
Warranty Information
2 Years
