Rockford Fosgate T2500-1bdCP Power 2500 Watt Class BD Constant Power Amplifier

Rockford Fosgate T2500-1bdCP Power 2500 Watt Class BD Constant Power Amplifier

The Power T2500-1bdCP is a 2,500 Watt mono amplifier featuring Constant Power. The T2500-1bdCP is so flexible and powerful you can use a pair in bdSYNC mode to create one massive amplifier that can deliver a whopping 5 Kilowatts.

• 24dB/octave crossover
• 1/0 AWG power/ground connectors
• Audiophile grade speaker connections
• Infrasonic filter
• MOSFET power supply
• MOSFET output stage
• RCA pass-thru outputs
• PowerSync - allows 2 amplifiers to be "strapped" together
• MasterSync - allows 1 amplifier to control an array of amplifiers
• 0°/180° Phase Switch
• Blue L.E.D. Simulated VU Signal/Power Meters
• 2 Years Standard Warranty =
• Get a 1 Year Extended Warranty (When fitted with Rockford Fosgate amp kit)

CEA-2006 Compliant:

CEA-2006 Power Rating 1500W x 1 @ 4åäÌ£_ ≤1.0% THD+N

Number of Channels:

1

Rated Power  (RMS Continuous Power):

1500 Watts x 1 @ 4-Ohm  2500 Watts x 1 @ 2-Ohm  2500 Watts x 1 @ 1-Ohm  Two amplifiers in bdSYNC:  5000 Watts x 1 @ 2-Ohm

Dynamic Power  (PVC/PowerCube®):

1823 Watts x 1 @ 4-Ohm  2940 Watts x 1 @ 2-Ohm  2980 Watts x 1 @ 1-Ohm

Bridgeable:

Yes  (two amps can be "strapped" together using bd-Sync2 cable to create one monster amplifier)

Frequency Response:

20Hz to 250Hz +/-0.5dB

Efficiency (average):

81.9% @ 4-Ohm  77.7% @ 2-Ohm  64.5% @ 1-Ohm

Total Harmonic Distortion (THD+Noise):

4-Ohm: <1.0%  2-Ohm: <1.0%  1-Ohm: <1.0%

Signal-to-Noise (CEA):

75 dB

Channel Separation:

—

Common Mode Rejection:

68 dB

Damping Factor:

>200

Crossover Controls:

Low-Pass (LP): 35Hz-250Hz @ 24dB/octave Butterworth  Infrasonic: 12dB/octave Butterworth, -3dB @ 28Hz

Tone Controls:

Bass: 0dB to +18dB @ 45Hz

Input Sensitivity:

150 mV to 4 V

Signal Input:

1 RCA pair

Signal Output:

1 RCA pair

Power Input Connector:

Block

Power Wire Gauge:

1/0 AWG

Speaker Output Connector:

Block

Speaker Wire Gauge:

8 AWG to 16 AWG

Heat Sink Type:

Cast aluminum

Cooling:

Convection

Remote Controls:

Optional Remote PEQ  (overrides built-in Punch Bass)

Visual Indicators:

Power (Blue LED)  Thermal (Red LED)  Protect (Yellow LED)  Output -00dB to +2dB @ 11 steps (Blue LEDs)  Battery 9VDC to 16VDC @ 11 steps (Blue LEDs)

Circuit Topology Class:

Class BD

Operating Voltage:

9 -16 VDC

Recommended Fuse  (not included):

300 A

Max. Current Draw (13.8V Sinewave):

350 A

Average Current Draw (13.8V Music):

175 A

Suggested Alternator:

200 A

Shipping Weight:

21.7 Lbs. (9.84 Kg.)

Dimensions (H x W x D):

2.14 x 8.14 x 21.875 (in)  5.44 x 20.68 x 55.66 (cm)

Dimensional Diagram:

CEA-2006 Compliant:

CEA-2006 Power Rating 1500W x 1 @ 4åäÌ£_ ≤1.0% THD+N

Number of Channels:

1

Rated Power  (RMS Continuous Power):

1500 Watts x 1 @ 4-Ohm  2500 Watts x 1 @ 2-Ohm  2500 Watts x 1 @ 1-Ohm  Two amplifiers in bdSYNC:  5000 Watts x 1 @ 2-Ohm

Total Power  (Sum of Rated Power):	2500 Watts RMS
0W745W1,490W2,235W2,980W3,725WRated Power2,980 Watts2,500 Wattst2500-1bdcp Dynamic Power

Dynamic Power  (PVC/PowerCube®):

1823 Watts x 1 @ 4-Ohm  2940 Watts x 1 @ 2-Ohm  2980 Watts x 1 @ 1-Ohm

Bridgeable:

Yes  (two amps can be "strapped" together using bd-Sync2 cable to create one monster amplifier)

Frequency Response:

20Hz to 250Hz +/-0.5dB

Efficiency (average):

81.9% @ 4-Ohm  77.7% @ 2-Ohm  64.5% @ 1-Ohm

Total Harmonic Distortion (THD+Noise):

4-Ohm: <1.0%  2-Ohm: <1.0%  1-Ohm: <1.0%

Signal-to-Noise (CEA):

75 dB

Channel Separation:

—

Common Mode Rejection:

68 dB

Damping Factor:

>200

Crossover Controls:

Low-Pass (LP): 35Hz-250Hz @ 24dB/octave Butterworth  Infrasonic: 12dB/octave Butterworth, -3dB @ 28Hz

Tone Controls:

Bass: 0dB to +18dB @ 45Hz