Description
Power 400 Watt 4-Channel Amplifier
T400-4
The Power T400-4 is a 4-channel amplifier capable of producing 100 Watts into each of its four channels at 2-Ohms. The T400-4 can run a 4-way full-range system or use component speakers on the front with subwoofers on the rear.
The T400-4 amplifier is perfect for front/rear fading stereo systems or when dedicated amplification is required between front stage speakers and rear subwoofer(s). Thanks to the Dynamic Thermal Management, the small chassis design insures it can be installed in any location – like under front seats.
24dB/octave crossover
2/4 channel input switch
MOSFET power supply
MOSFET output stage
4 Gauge power/ground connectors
Audiophile grade speaker connections
2-Year Warranty
CEA-2006 CompliantCEA-2006 GuidelinesCEA-2006 Power Rating
60W x 4 @ 4Ω
≤1.0% THD+N
Number of Channels4
Total Power
(Sum of Rated Power)400 Watts RMS
Rated Power
(RMS Continuous Power)60 Watts x 4 @ 4-Ohm
100 Watts x 4 @ 2-Ohm
200 Watts x 2 @ 4-Ohm Bridged
2-Ohm x 2 Bridged Stable
Dynamic Power
(PVC/PowerCube®) 84 Watts x 4 @ 4-Ohm 0° Res
139 Watts x 4 @ 2-Ohm 0° Res
272 Watts x 2 @ 4-Ohm Bridged
BridgeableYes
Frequency Response20Hz to 20kHz +/- 1dB
Input Sensitivity150 mV to 4 V
Circuit Topology ClassClass A/B
Efficiency (average)69% @ 4-Ohm
68% @ 2-Ohm
Total Harmonic Distortion (THD+Noise)4-Ohm: <1.0%
2-Ohm: <1.0%
Signal InputFront Low level: 1 RCA pair
Rear Low level: 1 RCA pair
Input Switch: 2CH / 4CH
Signal Outputn/a
Tone ControlsFront Channels - Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Rear Channels - Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Crossover ControlsFront High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Remote ControlsOptional Remote Punch EQ
(overrides rear channel built-in Punch EQ)
Visual IndicatorsPower
Thermal
Protect
Power Wire Gauge8 AWG to 4 AWG
Power Input ConnectorBlock
Speaker Wire Gauge8 AWG to 18 AWG
Speaker Output ConnectorScrew terminal barrier strip
CoolingConvection
Heatsink
Operating Voltage9 - 16 VDC
Recommended Fuse
(not included)60 A
Average Current Draw (13.8V Music)30 A
Max. Current Draw (13.8V Sinewave)60 A
Suggested Alternator75 A
Dimensional Diagram
Dimensions (H x W x D)2.14 x 8.14 x 13.66 (in)
5.42 x 20.68 x 34.69 (cm)
Shipping Weight11.90 Lbs. (5.39 Kg.)
