R-Series 10″ Halo Subwoofer with ProLink™
A subwoofer enclosure that sounds as good as it looks. Alpine’s preloaded, linkable subwoofer enclosures give you powerful performance with the unique Alpine Halo design and ProLink™. R-Series subwoofers take bass performance to extreme levels, delivering thunderous, ground-pounding bass. Audiophiles are satisfied too, R-Series subwoofers are highly accurate, making them perfectly matched to R-Series amplifiers and R-Series speakers to build an entire full-range Hi-RES Audio certified system and overall cohesive theme.
Optimal Sound Performance
The R-SB10V delivers incredible low-down, ground-pounding bass for the ultimate sound experience. The USA designed enclosure features an optimised vent and rounded internal port edges that maximises output performance of the subwoofer. The result is a higher total sound output for deep, powerful and accurate bass coupled with R-Series renowned reliability and endurance.
Built to Perform
Without compromise the R-SB10V is built from high-quality construction materials to achieve a custom look, without the custom work. Made from 3/4-inch medium density fibreboard (MDF) with internal edge bracing, the R-SB10V is sturdy and rugged, yet stylish with a premium black carpet covering and brushed aluminium finish on the metallic front baffle.
Tuned for R-Series
The R-SB10V includes a preloaded R-Series R-W10D4 10-inch subwoofer that’s tuned to 36Hz for optimised performance with Alpine R-Series sound system speakers and amplifiers. Dual 4Ω voice coils are wired in parallel for a 2Ω load that’s compatible with the R-Series R-A75M Mono Power Amplifier. Gold-plated binding post terminals allow for speaker wire, ring terminal, or quick disconnect banana plug connections.
Stand Out In the Crowd
The Alpine Halo platform modernises the look and feel of any vehicle. Drawing inspiration from the sleek, tapered lines and silver accent of the Alpine Halo Display, the R-SB10V shares the same design cues, with a curved silver trim and a metallic front baffle. The R-SB10V offers not only premium sound performance, but also elevates the interior of the vehicle for a subwoofer you can be proud to show off.
KTX-H10 Linking Kit
ProLink™ is unique to Alpine and allows you to link two R-SB10V enclosures together using an optional KTX-H10 Linking Kit (sold separately) to create a dual subwoofer-enclosure. Now you have the flexibility in power and price to use a single subwoofer or add another subwoofer immediately if more bass is desired, or gives you the capability to upgrade your bass later-on.
Unique ProLink™ Design
When you’re looking to make a noticeable impact in your sound system, you add a subwoofer that will bring out the low-end bas of your music. But what if you already have a single subwoofer and still crave more bass? You could throw out your single enclosure and purchase a new dual enclosure or you can build your bass with Alpine’s new ProLink™ technology.
Includes Preloaded R-W10D4 10” R-Series Subwoofer
Ground-breaking Alpine Halo Design
ProLink™ Ported Enclosure Design
USA Designed for Optimal Bass and Sound Quality Performance
CARB compliant 3/4-inch MDF construction
Premium Black Carpet
Silver Alpine Embossed Side Logo Badge
Brushed Aluminium Finished Metallic Front Baffle
KTX-H10 Linking Kit Ready
KTE-10G.2 Mesh Grille Ready
Peak Power Handling: 2250W
RMS Power Handling: 750W
High-Excursion Overhung Voice Coil Configuration
65.5mm Voice Coil with High-Temp 4-Layer DVC Winding on Aluminium Former
Stacked High-Grade Strontium Ferrite Magnets
Cast Aluminium Frame
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Management & Heat Transfer System
Optimised Dual Flare Pole Vent
Concealed Mount Gasket
Reinforced Parabolic Cone Structure (Pulp/Kevlar & PP/Mica/Talc Dust Cap)
High-Amplitude Multi-Roll (HAMR) Surround
Dimensions: 16” W x 12.6825” H x 14.5” D
Dual 4Ω Voice Coils Wired in Parallel for a 2Ω Load (Compatible with R-A75M)
12 Gauge OFC Speaker Box Wire
Binding Post Terminal Cup
Threaded Subwoofer Mounting Inserts (for reversible subwoofer orientation)
Nominal Impedance: 4Ω+4Ω Dual Voice Coil
2Ω Impedance Loading: (4Ω+4Ω Parallel Circuit)
Frequency Response: 26Hz-200kHz
Vented Enclosure Tuning Frequency: 36Hz