Description
Rockford Fosgate P1000X2 Punch 1,000 Watt 2-Channel Amplifier
The Punch P1000X2 is a 2-channel stereo amplifier capable of producing 500 Watts into each channel at 2-Ohms. The P1000X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.
High level input capable with Auto Turn-On circuit
RCA pass-thru outputs
Features C.L.E.A.N. Set-up
Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
12dB/octave Butterworth crossover
On-board Punch EQ with +18dB boost @ 45Hz
Muted turn on
Stealth top mounted control panel
Cast aluminum heatsink
Short circuit protection
Over current protection
1 Year Standard Warranty
Get a 1 Year Extended Warranty (When fitted with a Rockford Fostgate amp kit)
TRANS•<em>ana</em>DTMMEHSA<sup>3</sup>NOMAD C.L.E.A.N. Set-Up
CEA-2006 Compliant: CEA-2006 Power Rating
300W x 2 @ 4åäÌ£_
≤1.0% THD+N
Number of Channels: 2
Rated Power
(RMS Continuous Power): 300 Watts x 2 @ 4-Ohm
500 Watts x 2 @ 2-Ohm
1000 Watts x 1 @ 4-Ohm Bridged
Total Power
(Sum of Rated Power): 1000 Watts RMS
Dynamic Power
(PVC/PowerCube®): 401 Watts x 2 @ 4-Ohms 0° Res
656 Watts x 2 @ 2-Ohms 0° Res
Bridgeable: Yes
Frequency Response: 20Hz to 20kHz +/- 1.0dB
Efficiency (average): 69% @ 4-Ohm
64% @ 2-Ohm
Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0%
2-Ohm: <1.0%
Signal-to-Noise (CEA): >85 dB
Channel Separation: >50 dB
Common Mode Rejection: >55 dB
Damping Factor: >500
Crossover Controls: High-Pass/Low-Pass (HP/LP): 50Hz-250Hz 12dB/octave Butterworth
Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
Function depends upon LP/AP/HP switch position
Input Sensitivity: 150 mV - 12 V
Signal Input: Hi/Low level: 1 RCA pair
Signal Output: Low level: 1 RCA pair
Power Input Connector: Captive C-Clamp
Power Wire Gauge: 4 AWG
Speaker Output Connector: Captive C-Clamp
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: Optional Punch Level Control (PLC2) Ready
Visual Indicators: Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
Circuit Topology Class: Class A/B
Operating Voltage: 9 - 16 VDC
Recommended Fuse
(not included): 140 A
Max. Current Draw (13.8V Sinewave): 140 A
Average Current Draw (13.8V Music): 70 A
Suggested Alternator: 100 A
Shipping Weight: 15 Lbs. (6.80 Kg.)
Dimensions (H x W x D): 2.38 x 7.76 x 15.03 (in)
6.05 x 19.71 x 38.18 (cm)
Dimensional Diagram:
