Description
The PM300X1 is perfect for use as a dedicated subwoofer or center channel amplifier. Regardless if you're driving multiple speakers or just one, the hefty 2-ohm capability will deliver the right amount of PUNCH that you want! Now, thanks to its small chassis design, it will also fit where traditional amplifiers cannot.
High level input capable with Auto Turn-On circuit
RCA pass-thru outputs
Features C.L.E.A.N. Set-up
Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
12dB/octave Butterworth crossover
On-board Punch EQ with +18dB boost @ 45Hz
Muted turn on
Stealth top mounted control panel
Cast aluminum heatsink
Short circuit protection
Over current protection
Marine grade two part epoxy coating on circuit boards
Marine grade stainless steel hardware
2 Year Warranty
Recommended Fuse
(not included)
50 A
Total Power
(Sum of Rated Power)
300 Watts
CEA-2006 Compliant
CEA-2006 Power Rating
200W x 1 @ 4Ω
≤1.0% THD+N
Operating Voltage
9 - 16 VDC
Max. Current Draw (13.8V Sinewave)
45 A
Average Current Draw (13.8V Music)
23 A
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
Efficiency (average)
74% @ 4-Ohm
Shipping Weight
9.5 Lbs. (4.30 Kg.)
Crossover Controls
High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
All-Pass: Yes
Suggested Alternator
75 A
Input Sensitivity
150 mV - 12 V
Number of Channels
1
Rated Power
(RMS Continuous Power)
200 Watts x 1 @ 4-Ohm
300 Watts x 1 @ 2-Ohm
Dynamic Power
(PVC/PowerCube®)
260 Watts x 1 @ 4-Ohms 0° Res
444 Watts x 1 @ 2-Ohms 0° Res
Bridgeable
No
Tone Controls
Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
Function depends upon LP/AP/HP switch position
Signal Input
Hi/Low level: 1 RCA pair
Signal Output
Low Level: 1 RCA Pair
Power Input Connector
Captive C-Clamp
Power Wire Gauge
8 AWG to 4 AWG
Speaker Output Connector
Captive C-Clamp
Speaker Wire Gauge
8 AWG to 18 AWG
Heat Sink Type
Cast aluminum
Cooling
Convection
Remote Controls
Optional Punch Level Control (PLC2) Ready
Visual Indicators
Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
Circuit Topology Class
Class A/B
Frequency Response
20Hz to 20kHz +/- 1.0dB
Dimensions (H x W x D)
2.38 x 7.76 x 9.86 (in)
6.05 x 19.71 x 25.04 (cm)
Extra Information
Warranty Information
2 Years
