Installing your Thinkware Dash Cam couldn’t be easier when using the OBDTH01 OBD-II Power Harness. Instead of connecting 3 wires to the vehicle’s fuse box, the OBD-II harness simply connects to the OBD-II port in the vehicle, providing Plug & Play Installation. Once connected, access to the Parking Surveillance Mode on your Thinkware Dash Cam will be enabled, just as if you had hard wired the dash cam using the HWC Hard Wire Kit.
The kit includes an OBD-II T-Harness that features an OBD-II plug and socket, allowing it to plug in-line with the vehicles OBD-II port. This enables other OBD-II devices to be connected to the vehicle while the dash cam is connected, providing a seamless and discreet installation solution for your Thinkware Dash Cam.
The included ignition module as a power off delay feature providing consistent accessory power during varying vehicle conditions, such as engine shut-down at a red light, or alternator disengagement while driving. This feature is essential for vehicles with stop-start technology!
If you want to access the parking mode feature on your Thinkware Dash Cam, but don’t want the hassle of installing the hard wire kit, the OBDTH01 OBD-II Power Harness is what you need!
Suitable for use in vehicles with an OBD connection, this is found in most vehicles manufactured after 1990 and is normally located under the dashboard.
This harness is not suitable for use in electric vehicles.
Due to the power-off delay feature, the dash cam may take up to 3 minutes to switch between continuous record mode and parking surveillance mode when the vehicle ignition has been switched off.
Plug & Play Installation
Suitable for vehicles with OBD-II Ports (excluding electric vehicles)
Designed for all Thinkware Dash Cams
Enables Parking Surveillance Mode Feature on your Thinkware Dash Cam
T-Harness allows dash cam installation and still provides access to the OBD-II port in the vehicle
Power-Off Delay feature ensures the dash cam will operate correctly in varying vehicle conditions
3.77M cable length