Rockford Fosgate P1000X1bd Punch 1,000W Mono Amp

Rockford Fosgate P1000X1bd Punch 1,000 Watt Class BD Mono Amplifier

The Punch P1000X1bd mono amplifier pumps out 1,000 Watts into a 1-Ohm load. The Class BD technology produces bass more efficiently over traditional amps, and its frequency response is optimized for subwoofers.

• High level input capable with Auto Turn-On circuit
• Features C.L.E.A.N. Set-up
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• 12dB/octave Butterworth crossover
• RCA pass-thru outputs
• On-board Punch EQ with +18dB boost @ 45Hz
• Muted turn on
• Stealth top mounted control panel
• Cast aluminum heatsink
• Short circuit protection
• Over current protection
• Infrasonic filter
• 1 Year Standard Warranty 
• Get a 1 Year Extended Warranty (When fitted with a Rockford Fostgate amp kit)

CEA-2006 Compliant:

CEA-2006 Power Rating 300W x 1 @ 4åäÌ£_ ≤1.0% THD+N

Number of Channels:

1

Rated Power  (RMS Continuous Power):

300 Watts x 1 @ 4-Ohm  500 Watts x 1 @ 2-Ohm  1000 Watts x 1 @ 1-Ohm

Total Power  (Sum of Rated Power):

1000 Watts

Dynamic Power  (PVC/PowerCube®):

491 Watts x 1 @ 4-Ohms  874 Watts x 1 @ 2-Ohms  1,430 Watts x 1 @ 1-Ohm

Bridgeable:

No

Frequency Response:

20Hz to 250Hz +/- 1.0dB

Efficiency (average):

86% @ 4-Ohm

Total Harmonic Distortion (THD+Noise):

4-Ohm: <1.0%  2-Ohm: <1.0%  1-Ohm: <1.0%

Signal-to-Noise (CEA):

>80 dB

Common Mode Rejection:

>55 dB

Damping Factor:

>300

Crossover Controls:

Low-Pass (LP): 50-250Hz @ 12dB/octave Butterworth  Infrasonic Filter (IF): 28Hz @ 12dB/Octave Butterworth  All-Pass: No

Tone Controls:

Punch EQ2 Bass: 0dB to +18dB @ 45Hz

Input Sensitivity:

150 mV - 12 V

Signal Input:

Hi/Low level: 1 RCA pair

Signal Output:

Hi/Low level: 1 RCA pair

Power Input Connector:

Captive C-Clamp

Power Wire Gauge:

4 AWG

Speaker Output Connector:

Captive C-Clamp

Speaker Wire Gauge:

8 AWG to 18 AWG

Heat Sink Type:

Cast aluminum

Cooling:

Convection

Remote Controls:

Optional Punch Level Control (PLC2) Ready

Visual Indicators:

Power/Protect/Thermal LED  Input Clip LED3  Output Clip LED1,2,3  LED Color Legend:  1BLUE: <0.5% THD  2VIOLET: 1% THD  3RED: 10%+ THD

Circuit Topology Class:

Class BD

Operating Voltage:

9 - 16 VDC

Recommended Fuse  (not included):

140 A

Max. Current Draw (13.8V Sinewave):

130 A

Average Current Draw (13.8V Music):

65 A

Suggested Alternator:

100 A

Shipping Weight:

12.9 Lbs. (5.85 Kg.)

Dimensions (H x W x D):

2.38 x 7.76 x 13.28 (in)  6.05 x 19.71 x 33.73 (cm)

Dimensional Diagram: