Description
Punch Single 10" 300 Watt Amplified Subwoofer
P300-10
If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-10 is the right one for the job! The P300-10 features a Punch 10” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.
"Closed-loop" design ensures optimum performance between woofer, amplifier and enclosure
Built-in 0°/180° phase switch
Separate low level and speaker level inputs
Built-in adjustable bass boost EQ
Adjustable 12db/Octave low pass crossover
Detachable Power/Ground connector
Intelligent auto turn on/off function
Thermal and over/under voltage protection
High-efficiency, low current design
Remote bass level control included
Proprietary high output woofer
Constructed with 5/8" MDF
Large AWG input terminals
Covered with industrial heat activated vinyl
1 Year Warranty
Woofer Size10"
Woofer SeriesProprietary
Nominal Impedance (ea)—
Power Handling (Watts RMS)300 Watts RMS
Enclosure TypeAmplified
Speaker Connectorn/a
Dimensions
Box (H x W x D)
Wedge (H x W x D1 x D2)13.3 x 18 x D1 8.9 - D2 5.9 (in)
33.7 x 45.72 x D1 22.6 - D2 14.98 (cm)
Shipping Weight23.8 Lbs. (10.79 kg)
CEA-2031 CompliantCEA-2031 Guidelines
Frequency Response25 Hz to 200 Hz
Integrated Amplifier300 Watts RMS
Crossover ControlsVariable 35Hz to 150Hz
12dB/Octave Butterworth
Power Wire Gauge8 AWG
Heat Sink TypeExtruded Aluminum
Remote ControlIncluded
Circuit Topology ClassClass-D
Woofer Quantity1
Enclosure Material5/8" MDF (Medium Density Fiberboard)
Tone ControlsGain & Bass Boost
Signal InputLow-Level: 1 RCA Pair
High-Level: Left/Right Summed Inputs
Power Input ConnectorQuick Disconnect
Replacement Part: 1040-57860-01
CoolingConvection
Visual IndicatorsPower
Protect
CEA-2006 Compliant
