Description
Power 1,500 Watt Class-bd Constant Power Amplifier
T1500-1bdCP
The Power T1500-1bdCP is a 1,500 Watt mono amplifier featuring Constant Power delivering up to 25% more power across all impedance loads. The frequency response of the T1500-1bdCP is optimized exclusively for use with subwoofers in cars and trucks.
The new Constant Power amplifiers are the most powerful amplifiers on the market PERIOD! The T1500-1bdCP is an amplifier for subwoofers based on the legendary T1500-1bd amplifier design with a proprietary "Constant Power" configuration delivering up to 25% more power (Watts) across all impedance loads. The listening experience is cleaner, louder and more impressive than ever before. At 1,500 watts, this monster will run any demo vehicle competing in Sound Pressure Level.
Looking for more options? Check out all of our mobile power amps here.
24dB/octave crossover
MOSFET power supply
MOSFET output stage
4 Gauge power/ground connectors
Audiophile grade speaker connections
RCA pass-thru outputs
Infrasonic filter
2-Year Warranty
CEA-2006 CompliantCEA-2006 GuidelinesCEA-2006 Power Rating
1000W x 1 @ 4Ω
≤1.0% THD+N
Number of Channels1
Total Power
(Sum of Rated Power)1500 Watts RMS
Rated Power
(RMS Continuous Power)1000 Watts x 1 @ 4-Ohm
1500 Watts x 1 @ 2-Ohm
1500 Watts x 1 @ 1-Ohm
Dynamic Power
(PVC/PowerCube®)1045 Watts x 1 @ 4-Ohms
1549 Watts x 1 @ 2-Ohms
1715 Watts x 1 @ 1-Ohm
BridgeableNo
Frequency Response20Hz to 250Hz +/- 0.5dB
Input Sensitivity150 mV to 5 V
Circuit Topology ClassClass BD
Efficiency (average)86.2% @ 4-Ohm
74.6% @ 2-Ohm
63.0% @ 1-Ohm
Total Harmonic Distortion (THD+Noise)4-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%
Signal InputLow level: 1 RCA pair
Signal OutputLow Level: 1 RCA pair
Tone ControlsBass: 0dB to +18dB @ 45Hz
Infrasonic Filter: -3dB @ 28Hz 12dB/Octave
Crossover ControlsLow-Pass (LP): 35-250Hz 24dB/octave Butterworth
Remote ControlsOptional Remote Punch Bass EQ
(overrides built-in Punch Bass EQ)
Visual IndicatorsPower
Thermal
Protect
Power Wire Gauge4 AWG
Power Input ConnectorBlock
Speaker Wire Gauge8 AWG to 18 AWG
Speaker Output ConnectorScrew terminal barrier strip
CoolingConvection
Heatsink
Operating Voltage9 - 16 VDC
Recommended Fuse
(not included)200 A
Average Current Draw (13.8V Music)100 A
Max. Current Draw (13.8V Sinewave)200 A
Suggested Alternator100 A
Dimensional Diagram
Dimensions (H x W x D)2.14 x 8.14 x 14.91 (in)
5.42 x 20.68 x 37.86 (cm)
Shipping Weight14.35 Lbs. (6.50 Kg.)
